UPnGO roof tent lift

The UPnGO roof tent lift

Lifting, assembling, and storing. The UPnGO roof tent lift is used for both lifting and storing the roof tent. After the lifting process, the tent simply remains on the mobile lifting system. This allows for convenient movement and space-saving storage.

One-person operation. A single person can mount a roof tent weighing up to 120 kg on the vehicle roof with virtually no effort. Multi-gear transmissions and assisted gas springs ensure effortless operation.

Fits through any door. The maximum size, including the roof tent, is only 780 x 1,850 mm (width x height). The length corresponds to the length of the roof tent.
This means it fits through almost any basement or garage door.

Fits ALL roof tents. All roof tents from all manufacturers can be lifted with the UPnGO. We aren't aware of any roof tent with which it hasn't worked.

Fits ALL vehicles from 1,470 to 2,180 mm tall. Measured from the road edge to the top edge of the roof rack (crossbar). For taller or flatter vehicles, there are some tricks to help. If you're unsure, just ask us. We almost always have a solution.

Simply select the desired lifting height. We'll take care of the rest.
We'll contact you after you've placed your order and clarify which adapter you need for your vehicle/roof rack. You don't have to do anything. We'll take care of it so you can get started right away.
Of course, the adapter is already included in the price.

__________________________________________

Important information & tips:

Our roof rack recommendation
The optimal combination is with the Thule ProBar. These crossbars make using the UPnGO most comfortable. The Rhino Rack Heavy Duty is also comparable.
Thule Wing Bar, Square Bar, or similar roof rack systems also work. We have the right adapter for all of them.

Restrictions on closed expedition roof racks
Rhino Rack Pioneer, Cargo-Bear, Frontrunner Slimline, and similar enclosed roof platforms usually require special adapters or custom solutions. We can already offer custom solutions for many systems. If this requires an additional charge, we will discuss this with you beforehand.

If you have any questions, simply use the chat button in the product description.

Compatible roof tent sizes:

All roof tents up to 2,300 x 1,650 x 380 mm (LxWxH)
Minimum roof tent width = 1,200 mm
Maximum weight of the roof tent = 100 KG

Compatible vehicle roof heights including roof rack:
(Measured from the roadway to the top edge of the roof rack)

L = lifting height 1,770 to 2,180 mm
(Large SUVs, off-road vehicles, vans, even with lift kit...)

M = lifting height 1,620 to 2,030 mm
(Medium station wagon, crossover, caddy or similar ...)

S = lifting height 1,470 to 1,880 mm
(Small station wagon or crossover ...)

Lifting mechanism:
Gearbox with external drive (cordless screwdriver)

Weight of the lift system:
65 KG

Size without roof tent:
LxWxH = 1,000 x 800 x 1,800 (1,500)

Packaging size upon delivery (WxDxH):
1200 x 800 x 1,700 to 2,000 mm)

___________________________

IMPORTANT INFO FOR SELF-COLLECTION:
For transport, a van or trailer with a loading height of at least 1,850 (for the L model) is required for upright transport.
For horizontal transport, a loading area of at least 1,240 x 1,850 mm with a loading height of at least 780 mm is required.

Scope of delivery
- UPnGO roof tent lift (fully pre-assembled)
- Standard docking adapter for car roof racks
- Roof rack-specific additional adapter (depending on roof rack)
- Drive adapter for the cordless screwdriver

DANGER!

The UPnGO is a system for lifting heavy objects and, as such, is subject to the EC Machinery Directive according to DIN EN 1494. For such systems, the operational safety measures described in the manual MUST be observed. Failure to comply could result in danger to life and limb from falling loads and the risk of crushing injuries from moving components.

The operating sequence and safety instructions must be strictly followed.

Brand: 50°Nord®
Manufacturer/Producer: ide-tec KG | Erzweg 16 | 57299 Burbach